Arthroscopy Instruments: Names, Uses and Buying Guide

Arthroscopy instruments buyer guide by Xtreem Invent International

Arthroscopy lets surgeons work inside a joint through a few small incisions, called portals. A camera shows the joint on a screen, and slim hand instruments do the work: feeling, cutting, gripping and passing sutures. This guide explains the main arthroscopy instruments, what each one does, and what to check before you buy.

The basic arthroscopy kit

A standard arthroscopy setup combines the camera system with hand instruments and powered tools. The usual kit includes 30° and 70° arthroscopes, probes, scissors, basket forceps (punches), graspers, knives, motorized shavers and energy devices. This guide focuses on the hand instruments.

Arthroscopy hand instruments and their uses

InstrumentWhat it does
ProbeA blunt hook used to feel and test tissue, such as checking a meniscus tear or loose cartilage. It is often called the surgeon’s finger inside the joint.
Punch (basket forceps)Bites away small pieces of meniscus or soft tissue. Available straight, up-biting and angled left or right.
ScissorsCut soft tissue and sutures. Straight, curved and hooked patterns reach different parts of the joint.
GrasperHolds and removes loose bodies and tissue fragments. Many have a locking handle.
Suture passer and penetratorPierces soft tissue and carries suture through it during repairs.
Suture retrieverPicks up a suture inside the joint and pulls it out through a portal.
Knot pusher and suture cutterSlides knots down to the tissue and trims the suture ends.
RongeurRemoves small pieces of bone, for example with a detachable Kerrison rongeur.
90 degree arthroscopic punch forceps, left and right

Punches: angles and directions

Punches do much of the work in meniscus surgery. A straight punch works directly ahead, an up-biting punch reaches tissue above the jaw, and angled left and right punches, such as 90° patterns, reach around the curve of the meniscus. Most surgeons keep several patterns in the same tray.

Scissors and suture instruments

Hooked and angled scissors cut tissue that a straight blade cannot reach. For repairs, a penetrator or suture passer carries the suture through tissue, and a retriever brings it back out. Knot pushers and suture cutters finish the repair.

Arthroscopic hook scissors 3.5mm, straight and curved

How to choose arthroscopy instruments

  • Match the joint. Knee and shoulder work usually uses shorter shafts. Hip arthroscopy needs longer instruments to reach a deep joint.
  • Check the shaft diameter. Common sizes include 2.7mm, 3.5mm and 4mm. Smaller instruments suit small joints and tight spaces.
  • Choose tip angles and directions that cover the whole joint: straight, up-biting, and left and right.
  • Look at the handle. Ratchet or locking handles help when holding tissue or a suture for a long time.
  • Think about cleaning. Arthroscopy instruments have narrow channels. Designs that open or come apart are easier to clean thoroughly.
  • Check the jaws. They should close evenly and cut cleanly without tearing tissue.

Care and maintenance

  • Arthroscopy instruments are delicate. Handle them gently and never use a grasper or punch to lever tissue or bone.
  • Flush the shaft and open or disassemble the instrument as soon as possible after use.
  • Follow your facility’s reprocessing procedures for steam sterilization.
  • Check the jaws and tips before each case, and send dull or bent instruments for repair.

Arthroscopy instruments from Xtreem Invent

We manufacture arthroscopy hand instruments in our own factory in Sialkot, Pakistan, and supply surgeons, hospitals and distributors in the USA and worldwide. Our range includes 90° arthroscopic punch forceps, left and right, hook punch forceps 2.7mm, hook scissors 3.5mm, the bird beak penetrator retriever and the detachable Kerrison rongeur. See the full arthroscopic instruments range.

Arthroscopic bird beak penetrator retriever for passing sutures

Need a different angle, jaw or shaft size? We make arthroscopy instruments to order as custom instruments, and distributors can order through our OEM and private label service. You may also find our Kerrison rongeur guide useful.

Frequently asked questions

What is the most important arthroscopy hand instrument?

The probe. Surgeons use it in almost every case to feel and test the tissue before deciding what to do.

What is the difference between a punch and a grasper?

A punch bites tissue away. A grasper holds tissue or loose fragments so they can be pulled out of the joint.

Are arthroscopy instruments reusable?

Our arthroscopy hand instruments are reusable stainless steel instruments, designed to be cleaned and steam sterilized following your facility’s procedures.

Do you ship arthroscopy instruments to the USA?

Yes. Catalogue items are delivered in 15 to 25 working days, not counting holidays. Shipping is a flat $49 per order and free on orders over $349.99.

Have a question or need a quote? Contact our team or send us your instrument list.

Get High-Quality Surgical Instruments Direct from Manufacturer

Trusted by healthcare professionals worldwide for precision, durability, and performance.