
Blog
Dental Implant Instruments: Surgery Kits, Sinus Lift and Drivers
Dental implant treatment happens in stages: the implant is placed in the jaw, the bone is sometimes built up first, and after healing a crown or bridge is fixed on top. Each stage uses its own instruments. This guide explains the dental implant instruments for each stage, how our kits differ, and what to check before you buy, including compatibility with your implant system.

Dental implant instruments by stage
| Stage | Instruments | Our kit |
|---|---|---|
| Implant surgery | Surgical hand instruments for placing implants and handling grafts | Dental Implant Surgery Kit with PRF Box |
| PRF preparation | PRF box for pressing platelet-rich fibrin into membranes and plugs (centrifuge separate) | Included in the implant surgery kit |
| Crestal sinus lift | Osteotomes with concave tips, tapped up the implant site | Manual Sinus Lift Osteotome Kit |
| Sinus lift drilling | Drills with stoppers that limit drilling depth | Sinus Lift Drill and Elevation Kit |
| Restoration | Drivers for abutment and prosthetic screws | Implant Prosthetic Universal Driver Kit |
| Maintenance | Gracey curettes for cleaning below the gum line | Gracey Curette Set |
The implant surgery kit and PRF box
Our Dental Implant Surgery Kit with PRF Box and GRF System groups surgical instruments for implant placement, PRF preparation and guided bone regeneration. PRF, or platelet-rich fibrin, is made from the patient’s own blood in a centrifuge, and the PRF box is used to press it into membranes and plugs for use at the surgical site. The centrifuge is supplied separately. The surgical instruments are general, so they work alongside most implant systems; tell us yours and we will check.
Sinus lift: osteotomes or drills
When an implant is planned in the upper back jaw, there may not be enough bone below the sinus. A sinus lift raises the sinus floor to make space for bone graft. In a crestal sinus lift, the floor is raised from inside the implant site. Our manual sinus lift osteotome kit has concave tips that gather bone and graft material and push it ahead as each osteotome is tapped gently up the site with a light mallet. The kit gives graduated sizes, so the site is widened step by step.
The sinus lift drill and elevation kit contains sinus lift drills, drill stops and guides, sinus membrane elevation tools, implant preparation instruments and ratchet and driver components in a surgical box. The stoppers fit on the drills and stop them at a set depth, which helps control how deep each drill goes. Tell us your handpiece so we can confirm the drill shank fits, and ask us which sinus lift technique the kit supports.
Prosthetic drivers
After the implant has healed, the crown or bridge is fitted on top, and the abutment and prosthetic screws are tightened with drivers. Our Implant Prosthetic Universal Driver Kit groups these drivers in one organised case. Driver tips differ between implant systems, so tell us your system and we will confirm the fit before you order. Single drivers are also available.

Around the implant: curettes, exam kits and extraction
Implants need regular maintenance. Our Gracey curette set is used for cleaning below the gum line, with each curette shaped for particular teeth and surfaces, and our dental examination kit holds a mouth mirror, college tweezers, an excavator, a filling instrument and a dental syringe on a stainless steel tray. Many implant cases start with an extraction: see our dental extraction forceps guide, the set of 15 dental elevators and the basic oral surgery kit.
How to choose dental implant instruments
- Check compatibility first: drivers and drills must match your implant system and handpiece.
- Choose your sinus lift approach: concave osteotomes for a crestal lift, or the drill kit with stoppers for controlled drilling.
- Remember that the centrifuge for PRF is bought separately.
- Ask for the current contents list of any kit before you order.
Care and maintenance
Clean drills and osteotomes straight after use, brushing bone debris from flutes and tips. Replace drills when they no longer cut cleanly, and check driver tips for wear, because a worn tip can strip a screw. Keep each kit organised in its box and sterilise according to your clinic’s protocol.
Dental implant instruments from Xtreem Invent
We make dental instruments in our own factory in Sialkot, Pakistan, and supply dentists, clinics and distributors in the USA and worldwide. See all dental surgical instruments, or send us your instrument list for a custom kit.
Frequently asked questions
What instruments are used for dental implants?
A surgical kit for placing the implant, sometimes sinus lift osteotomes or drills to build up the bone first, and prosthetic drivers to fit the crown or bridge.
Does the PRF box include a centrifuge?
No. The centrifuge is supplied separately.
Will the drivers fit my implant system?
Driver tips differ between implant systems. Tell us your system and we will confirm the fit before you order.
Do you ship dental implant instruments to the USA?
Yes. Catalogue items are delivered in 15 to 25 working days.
Have a question or need a quote? Contact our team.

Chief Executive Officer (CEO)
Zi-Jah Chaudery is the Chief Executive Officer (CEO) at Xtreem Invent, bringing over 20 years of core expertise in the surgical instruments and medical devices manufacturing sector. A visionary leader in international trade and global B2B healthcare exports, he specializes in supply chain management, compliance, and international quality standards. Under his leadership, Xtreem Invent connects premium Pakistani manufacturing with healthcare facilities worldwide.

