Bone Holding Forceps: Types, Uses and Buyer Guide

Bone holding forceps buyer guide

Bone holding forceps keep a bone or fragment still while the surgeon drills, places a plate or inserts a screw. Reduction forceps bring the pieces of a broken bone back into position and hold them there until fixation is applied. They are among the most used instruments in any trauma tray. This guide compares the main patterns, explains sizes and locking, and shows how to choose.

Lowman bone holding clamp with screw mechanism

Bone holding and reduction forceps compared

PatternGrip and lockingSizes and optionsTypical use
LaneSerrated jawsWith or without ratchetGripping and steadying a long bone during fracture fixation
Lowman clampJaws closed by a screw12, 14, 18, 20 or 22 cm openingHolding a long bone and a plate together while drilling and placing screws
Three-clawTwo claws on one side, one on the other; ratchetUpper limb or lower limb patternHolding fragments without letting the bone rotate
Pointed reductionTwo sharp points; ratchet or speed lockSmall, medium, large or set of 3Holding fracture fragments together with little disturbance to the tissue
Pelvic reductionRatchet25 cm, straight or angledReducing large, deep pelvic and acetabular fragments
Crab claw (phalanges)Toothed jaws; ratchetFor small bonesSmall bones of the hand and foot
PatellaRatchetOther sizes on requestHolding the kneecap during fracture fixation

Locking: ratchet, screw or by hand

Most bone holding and reduction forceps lock with a ratchet, so they keep their grip while the surgeon’s hands are busy. The Lowman clamp closes with a screw mechanism and holds at the set grip. The Lane forceps comes with or without a ratchet: the ratchet version is the common choice for plating because it frees a hand, while the version without a ratchet gives a faster grip and release and more feel when repositioning a bone repeatedly.

Matching the forceps to the bone

Size matters, because a forceps that is too small will not hold a large bone securely. The Lowman clamp comes in five openings: 12 and 14 cm for the forearm and smaller long bones, 18 cm as a common general size, and 20 and 22 cm for the femur and other large bones. The three-claw forceps comes in a lighter upper limb pattern, for the humerus, radius and ulna, and a heavier lower limb pattern that opens wider for the femur and tibia. Pointed reduction forceps come small, for the hand, foot and other small bones, medium for the forearm, and large for long bones.

Pointed reduction forceps in small, medium and large

Reduction forceps for special areas

Pelvic fractures are deep and the fragments are large, so our pelvic reduction forceps is 25 cm long, in a straight version that reaches straight down into the wound and an angled version for fragments that lie at an angle to the incision. Pelvic trays usually carry both. For the small bones of the hand and foot, the crab claw phalanges reduction forceps has toothed jaws that stop it slipping on small, smooth bone. The patella bone holding forceps is made for holding the kneecap during fracture fixation, and our general bone holding forceps suits everyday trauma work.

Three-claw bone holding forceps for upper and lower limb

Related instruments: cables, wires and pins

Bone holding forceps work alongside fixation instruments. For cerclage, the cable compression forceps tensions and holds a bone cable while it is locked; the cable is then cut with a separate cable cutter. For wires, pins and rods, see our double action tungsten wire cutter, cerclage wire twister and cutter, heavy duty pin cutter and spinal rod cutter.

How to choose bone holding forceps

  • Size the forceps to the bone: small for the hand and foot, medium for the forearm, large for the femur and tibia.
  • Choose the grip: serrated jaws (Lane), points (pointed reduction), three claws to stop rotation, or toothed jaws for small bones.
  • Choose the locking: a ratchet frees a hand, and the Lowman screw clamp holds a plate to the bone while you drill.
  • Pelvic and acetabular work needs long reduction forceps, straight and angled.
  • Build a set, for example pointed reduction forceps in three sizes, a Lowman clamp and a Lane forceps.

Care and maintenance

Clean ratchets, box joints and serrations straight after surgery with the forceps fully open. Check that the ratchet engages and releases cleanly, that points and teeth are not bent, and that the Lowman screw turns freely. Lubricate the joints and sterilise according to your hospital’s protocol.

Bone holding forceps from Xtreem Invent

We make bone holding and reduction forceps in our own factory in Sialkot, Pakistan, and supply hospitals, surgeons and distributors in the USA and worldwide. See all general orthopedic instruments and our orthopedic surgical instruments, or read our orthopedic instruments list, orthopedic plate benders guide and bone rongeur guide.

Frequently asked questions

What are bone holding forceps used for?

To keep a bone or fragment still while the surgeon drills, places a plate or inserts screws.

What is the difference between bone holding and reduction forceps?

Bone holding forceps steady a bone. Reduction forceps bring the pieces of a broken bone back into their correct position and hold them there until fixation is applied. Many patterns do both.

Do bone holding forceps lock?

Most do, with a ratchet. The Lowman clamp tightens with a screw, and the Lane comes with or without a ratchet.

Which size should I order?

Match the forceps to the bone: small for the hand and foot, medium for the forearm and large for long bones. A set of sizes covers a trauma tray.

Do you ship bone holding forceps to the USA?

Yes. Catalogue items are delivered in 15 to 25 working days.

Have a question or need a quote? Contact our team.

Get High-Quality Surgical Instruments Direct from Manufacturer

Trusted by healthcare professionals worldwide for precision, durability, and performance.